Start With Your Scenario, Not a Generic Answer
I coordinate emergency solar equipment replacements — the kind where a homeowner's inverter dies eight days before a net-metering deadline, or a fleet manager needs three trucks outfitted with inverters by Monday. In four years, I've handled 70+ rush jobs. Same industry. Completely different decisions.
The calls I get fall into three buckets. A homeowner in Lehi whose Sunrun lease is ending and wants to know if buying out makes sense. A small business owner who needs backup power and can't decide between a pure sine wave solar generator and a cheaper modified sine wave unit. A semi truck driver who wants to run a microwave and a CPAP machine on 120V and has no idea which inverter won't fry his electronics.
If someone gives you one universal answer to all three, they're selling something. Here's how I break it down.
Scenario A: Your Sunrun Lease Is Ending — Buyout, Renew, or Walk?
This is the most common call I get, and the one with the most misinformation floating around. The lease end-of-term decision isn't about whether Sunrun is "good" or "bad." It's about math and risk tolerance.
What the buyout actually costs
Sunrun lease buyout pricing varies by contract vintage, system size, and remaining term. Some older leases have buyout formulas that make a buyout a no-brainer. Others don't. The bottom-line number you need to calculate is: total remaining lease payments plus the buyout quote, versus the cost of a new owned system or the cost of continuing to lease.
I've seen buyout quotes come in at $4,200 for a system with six years left on the contract. I've also seen $11,800 for a system with four years left. Same state. Different vintages. That's not a scam — it's just how these contracts were written at different times.
On those Lehi reviews you're reading
If you're in Lehi, Utah, and scanning Sunrun reviews, filter aggressively. Separate installation-quality complaints from billing and customer-service complaints. In snowy climates, installation delays are real — not necessarily a red flag, but a scheduling constraint you should plan around. And remember: people who had a smooth experience rarely leave reviews. You're looking at a skewed sample.
"I've never fully understood why two Sunrun installers in the same metro area can quote such different buyout numbers. My best guess is it comes down to contract timing, local labor costs, and how the system was originally priced. If someone has a clearer answer, I'd genuinely like to hear it."
The TCO trap
Here's the thing: the lowest monthly lease payment isn't the cheapest option over 20 years. Add up every payment, the buyout, the inverter replacement you'll likely need in year 12-15, and any roof work required for the install. That's your total cost of ownership. The $89/month lease that looks cheaper than a $119/month one can flip entirely when you factor in a buyout that's 40% higher.
Per FTC guidelines (ftc.gov/business-guidance/advertising-marketing), any specific savings claim you see in solar marketing — "save 30% on your electric bill" — must be substantiated with evidence. If a sales rep won't show you the underlying assumptions, that's a red flag.
Scenario B: Backup Power — Pure Sine Wave Solar Generator vs. Cheaper Alternatives
Different problem entirely. You're not managing an existing contract; you're buying new equipment for outage protection or off-grid capability.
When pure sine wave matters
A pure sine wave solar generator produces clean AC power that mimics grid electricity. Modified sine wave units produce a stepped approximation. For resistive loads — space heaters, incandescent lights, basic power tools — the difference is negligible. For sensitive electronics — medical devices, laptops, modern refrigerators with digital compressors, CPAP machines — modified sine wave can cause overheating, audio hum, or outright failure.
I learned this the expensive way. Saved $200 on a modified sine wave inverter for a client's backup setup. Three months later, the client's CPAP machine circuit board fried. Replacement cost: $900. Net loss: $700. That was the last time I recommended modified sine wave for anything medical.
What pure sine wave costs
A 2,000W pure sine wave solar generator typically runs $1,200-2,400 depending on battery capacity (based on major retailer quotes, January 2025; verify current pricing). Modified sine wave equivalents run $400-900. The gap is real. But if you're powering anything with a motor or a microchip, the gap pays for itself the first time something doesn't fry.
The non-obvious cost
Don't just compare sticker prices. Factor in: battery replacement cycles (most lithium units need new cells every 5-8 years), solar panel add-ons if you want true recharge independence, and transfer switch installation if you're tying it into home wiring. That's the TCO picture. The $1,400 unit with a 10-year battery lifespan can be cheaper than the $800 unit you replace twice.
Scenario C: The Best Power Inverter for a Semi Truck
This one's deceptively simple. A truck driver wants to run a 120V inverter off the truck's 12V system. What could go wrong?
Plenty.
Size it for startup surge, not running watts
A 700W microwave might pull 1,100W during startup. A mini-fridge compressor can spike to 3x its running draw. If you size your inverter to running watts, it'll trip every time the compressor kicks on. For most sleeper-cab setups running a microwave, fridge, TV, and laptop, a 2,000W-3,000W pure sine wave inverter is the practical floor. You'll need to verify your alternator output can handle the load — most modern trucks can, but older units with a 160-amp alternator may struggle when everything runs simultaneously.
The 120V question
Most truck inverters output 120V AC, which is what you need for standard US appliances. Make sure the unit is rated for continuous output, not just peak. A "3,000W peak / 1,500W continuous" inverter is a 1,500W unit in real-world terms. That distinction matters.
What I'd actually buy
I've tested six different inverter brands in fleet applications. The consistent winner isn't the most expensive one — it's the one with the best thermal management and the clearest warranty terms. Inverter failures in trucks are almost always heat-related, so look for units with active cooling and a rated operating temperature above 100°F. A $350 unit with good cooling outperforms a $600 unit that overheats in a Phoenix summer.
One more thing: hardwire it if you can. Plug-in inverters vibrate loose on rough roads. Hardwired units with a fused connection to the battery are more reliable and less likely to fail at the worst possible moment — like a 2 AM delivery window in Wyoming.
Which Scenario Are You?
Three quick questions to locate yourself:
- Do you already have solar installed and a contract you're managing? You're in Scenario A. Focus on the total remaining cost, not the monthly payment.
- Are you buying backup power for sensitive electronics or medical devices? You're in Scenario B. Pure sine wave isn't optional.
- Are you outfitting a vehicle or mobile workspace? You're in Scenario C. Size for surge, hardwire the connection, and prioritize cooling over brand name.
And if you're somehow in all three — a homeowner with a leased system who also drives a semi and wants backup power — pick the one with the nearest deadline. That's what I'd do. Deadlines don't move. Everything else can wait a week.
"I still kick myself for not telling a client to photograph their panel serial numbers before a lease transfer. Two years later, we're still sorting out warranty coverage. Takes thirty seconds to do. Saves years of headache."
Bottom line: the right answer depends on which problem you're actually solving. Figure that out first, and the equipment choice gets a lot simpler.